Mold & Mildew
- Quickly remove tough surface mold and mildew stains on a wide variety of surfaces throughout the home, including ceramic tile, baseboards, fabrics, glass, brick, concrete, natural stone, laminated countertops, fully cured and oil-based painted surfaces, hard plastics, automobile tires, wood, grout and fiberglass.
- Bleach-free stain remover has a foam sprayer that allows for a more direct application, preventing splash back and spores from spreading in the air.
- Part of the EPA’s Safer Choice Program recognizing the product as a safer alternative to traditional chemicals.
- Should not be used on metals or finishes, especially stainless steel appliance exteriors.
Look for Mold & Mildew in this size
- 22 oz. spray
- 32 oz. spray
For use on these surfaces
- Baseboards
- Brick
- Ceramic
- Concrete
- Fabric
- Fiberglass
- Glass
- Grout
- Hardwood
- Marble
- Wood
More information
How Our Mold and Mildew Stain Remover Works
- On initial use, turn the front of the nozzle into the ‘ON’ position, depress the trigger all the way back to the neck of the bottle 3-5 times consecutively.
- Test on a small hidden area before use especially: wallpaper, fabrics, plastics and fiberglass.
- Saturate using sprayer and let sit on stain for 10 minutes.
- Wipe off with a dry clean cloth.
- Saturate stain and allow Mold & Mildew to penetrate the stain for 10 minutes.
- Blot thoroughly with dry clean cloth until area is dry.
To remove stains on fabrics:
- Place clean cloth behind stain and spray with Mold & Mildew.
- Blot top of stain with dry clean cloth until dry.
- After removing stain, clean as recommended by manufacturer.
Do Not:
- Mix with any other household cleaners or chemicals including bleach as toxic fumes may result.
- Reuse empty bottle.
- Use on stainless steel appliance exteriors.
If excess mold and mildew are present, wear heavy duty vinyl gloves and face mask to remove excess amounts. Use exhaust fan and open windows.
Product ingredients
| Water | Dilutent: CAS #7732-18-5 |
|
|
| Dilutent: CAS #7732-18-5. Reverse Osmosis (RO) is a water treatment process that removes contaminants from water by passing the water through a membrane, (filter), where contaminants are filtered out yielding more pure quality water. | |||
| C9-11 Alcohols Ethoxylated | Surfactant: CAS #68439-46-3. |
|
|
|
Surfactant: CAS #68439-46-3. It is used in cleaners to modify the surface tension of water, to aid in even spreading and to allow mixing with oil and dirt so that they can be rinsed away. As part of the EPA Safer Choice Program, it has been evaluated and determined to be safer than traditional chemical ingredients. California CPRKA Designated Lists (3) EU Endocrine Disruptors. https://echa.europa.eu/candidate-list-table (16) California NLs. https://oehha.ca.gov/water/notification-levels-chemicals-drinking-water (18) California TACs. https://ww3.arb.ca.gov/toxics/id/taclist.htm (20) California Non-Cancer Hazards. https://oehha.ca.gov/air/general-info/oehha-acute-8-hour-and-chronic-reference-exposure-level-rel-summary |
|||
| Lauramine Oxide | Surfactant: CAS #1643-20-5. |
|
|
| Surfactant: CAS #1643-20-5. Used in cleaners to modify the surface tension of water, to aid in even spreading and to allow mixing with oil and dirt so that they can be rinsed away; it is included in many soaps, detergents, and several groups of antiseptics. As part of the EPA Safer Choice Program, it has been evaluated and determined to be safer than traditional chemical ingredients. | |||
| Tripropylene Glycol n-Butyl Ether | Solvent: CAS #55934-93-5. |
|
|
|
Solvent: CAS #55934-93-5. Used to slow down the evaporation of many liquid products including oven cleaners and inks for ball-point and felt-tip pens. It is very effective at absorbing organic material. As part of the EPA Safer Choice Program, it has been evaluated and determined to be safer than traditional chemical ingredients. California CPRKA Designated Lists (12) US NTP Reproductive or Developmental Toxicants. https://ntp.niehs.nih.gov/publications/monographs/index.html (16) California NLs. https://oehha.ca.gov/water/notification-levels-chemicals-drinking-water (18) California TACs. https://ww3.arb.ca.gov/toxics/id/taclist.htm (20) California Non-Cancer Hazards. https://oehha.ca.gov/air/general-info/oehha-acute-8-hour-and-chronic-reference-exposure-level-rel-summary |
|||
| Sodium Gluconate | Chelating Agent/Processing Aid: CAS #527-07-1. |
|
|
| Chelating Agent/Processing Aid: CAS #527-07-1. A salt of gluconic acid. It acts as a chelating agent that makes metals more soluble in water and is a processing aid commonly used in household cleaning products. It is often found in bar soap, sunscreen, shampoo, toothpaste and a variety of other products as well. As part of the EPA Safer Choice Program, it has been evaluated and determined to be safer than traditional chemical ingredients. | |||
| Potassium Bicarbonate | Cleaning Agent: CAS #298-14-6. |
|
|
| Cleaning Agent: CAS #298-16-6. Potassium Bicarbonate is an effective inorganic salt, that can be used as a replacement for sodium bicarbonate (baking soda). As part of the EPA Safer Choice Program, it has been evaluated and determined to be safer than traditional chemical ingredients. | |||
| Sodium Lactate | Moistening Agent: CAS #867-56-1. |
|
|
| Moistenting Agent: CAS #867-56-1. Derived from the natural fermentation of sugar. Sodium lactate is the sodium salt of lactic acid. It is sometimes used in liquid soap products, as it is an effective substance used to keep things moist. As part of the EPA Safer Choice Program, it has been evaluated and determined to be safer than traditional chemical ingredients. | |||
| Trisodium Dicarboxymethyl Alaninate | Chelating Agent: CAS #164462-16-2. |
|
|
| Chelating Agent: CAS #164462-16-2. environmentally friendly chelating agent, a compound that makes metals more soluble in water. It is a substitute for phosphates and is approved by, and listed on the EPA Design for the Environment Certification Program (DFE). As part of the EPA Safer Choice Program, it has been evaluated and determined to be safer than traditional chemical ingredients. | |||
FAQs
How do I use Mold & Mildew on a front load washing machine?
For best results in front loading washing machine, product should be applied once per week, soon after using machine. Surfaces need to be allowed to dry after application. If mold is left on surface, like rubber gaskets or grout, for even a week, mold can embed into surface, in which case product will no longer work effectively.
Can I use Mold & Mildew on painted surfaces?
Our product is safe to use on fully cured and oil based painted surfaces only. Always spot test first. Do not use on powder coated or aged/worn painted surfaces.
Why Combat Mold and Mildew?
Leverage the power of a mold and mildew stain remover and never look back. Mold typically grows in areas where moisture levels are elevated.
As one of the best mold and mildew stain removal products, Mold & Mildew helps combat unsightly mold and mildew stains, saving you time and energy.
Fighting these dangerous substances throughout your home requires a mold and mildew stain remover that's safe for your family and pets, yet potent when fighting these enemy substances.
As a mold and mildew spray, Mold & Mildew removes stains on a wide variety of surfaces. Just pick up our bottle and spray it. It is that easy.
A MOLD AND MILDEW STAIN REMOVER: AN EPA SAFER CHOICE
When choosing a mold and mildew stain remover, product safety is a top priority. That’s why you’ll be excited to learn that Mold & Mildew cleaner is part of the EPA Safer Choice pollution prevention program.
CLR BrandsTM cares about your family and pets, which is why we prioritize our commitment to the EPA Safer Choice program. Remove mold and mildew stains using Mold & Mildew cleaner without unnecessary worry.